Lanner IIOT-I530, User Manual, Page: 34 / 80

IIOT-I530 User Manual
34
The system supports one M.2 E-key slot for a Wi-Fi module card, an optional accessory. Wi-Fi module requires
two antennas. Please follow the steps to install the Wi-Fi module card.
1. Power off the system, turn the
system around, and open the
bottom chassis cover.
2. Locate the M.2 E-Key slot on the
motherboard.
3. Align the notch of the 5G module
card with the socket key in the pin
slot.
4. Insert the Wi-Fi module card pins at
30 degrees into the socket until it is
fully seated.
5. Push down on the module card and
secure it with a screw.
6. Next, thermal pad placement.
Remove the protective film from
Thermal Pad E (included in Partition &
Thermal Pad Kit), and gently place on
the module surface.
Socket Key
Notch
Note
When Wi-Fi feature is required, please inform your dealer when issuing purchase order, as the two SMA
antenna connectors must be pre-assembled on the housing by Lanner.