Lanner IIOT-I330, User Manual, Page: 15 / 82

IIOT-I330 User Manual
15
The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper)
pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the pin
header), certain feature can be enabled or disable. When changing the jumpers, make sure your system is
completely turned off.
1. RST2 : Reset Button
Push SW No Lock TS-02PV-130, 4-pin, H:7.1mm, Dip Zeetek
2. RST1
: HW/SW Reset Select
3. JCMOS 1/2 : Clear CMOS
Jumper Description
1-2 (Default) Normal
2-3 Clear CMOS
4. DP1 : Display Port Connector
Pin No. Description Pin No. Description
1 DP0_TXP0 2 GND
3 DP0_TXN0 4 DP0_TXP1
5 GND 6 DP0_TXN1
7 DP0_TXP2 8 GND
9 DP0_TXN2 10 DP0_TXP3
11 GND 12 DP0_TXN3
23 DPP_AUX_EN_N 14 CONFIG2
25 DPP_AUX_CHP 16 GND
17 DPP_AUX_CHN 18 HPD
19 RETURN 20 DP_PWR
Jumper Description
1-2 Software reset
2-3 (Default) Hardware reset