Lanner IIOT-I300, User Manual

Page: 62 / 70

IIOT-I300 User Manual
62
Feature Options Description
Restore AC Power
Loss
Power On
Power Off
Last State
Specify what state to go to when power is re-applied after a
power failure (G3 state).
S0 State: System will boot directly as soon as power applied.
S5 State: System keeps in power-off state until power button
is pressed.
BIOS Lock
Enabled
Disabled
Enable/Disable the SC BIOS Lock Enable feature. Required to
be enabled to ensure SMM protection of flash.
RTC Lock
Enabled
Disabled
Enable will lock bytes 38h-3Fh in the lower/upper 128-byte
bank of RTC RAM
GPIO Lock
Enabled
Disabled
Enable to set GPIO Pad Configuration Lock for security