Lanner ICS-I370, User Manual, Page: 40 / 82

ICS-I370 User Manual
40
4. Insert the SATA cables to the SATA contact
on the disk.
5. Place the bracket holder on the bracket
and secure with two (2) screws.
6. Place the bracket (with installed SSD) on
the chassis cover, secure with four (4)
screws.
7. Make sure the metal partition on the
motherboard has been removed to
provide access to SATA1 & SATAPWR1
port. Remove the metal partition by
unscrewing the two (2) screws.
8. Insert the other end of the SATA data
cable to SATA1 port on the motherboard
and the end of the SATA power cable to
SATAPWR1 port.
Arrange the cables neatly to avoid them
from getting tangled when closing the
chassis cover.