HLM-1101 User Manual
23
Tofino Switch ASIC
The Tofino ASIC is
connected to the CPU’s PCIe root complex over PCIe 2x operating in Gen2 mode.
Upon
boot up, the BIOS and the OS enumerate the PCIe bus and sets up the Base Address Registers for Tofino.
To confirm this setup from the Ubuntu shell, use the lspci command as below:
sudo lspci -v -d 1d1c:
To fully operate Tofino switch, ASIC will require Intel Software Development Environment (SDE) installed
on the operating system.
1. Download
from Intel website.
2. After downloading and installing SDE, please request Lanner to provide Board Support Platform (BSP)
for HLM-1101 with installation instructions.
