17
Bios Settings
Chapter 4
Network Application Platforms
W83627DHG HW Monitor
This menu shows the hardware monitor configuration
settings. Select an item then press <Enter> to display the
configuration options.
PC Health Status
SYS/CPU/AUX Temperature
The onboard hardware monitor automatically detects and
displays the CPU and motherboard temperatures.
CPUFAN0 Speed (CPU FAN)
The onboard hardware monitor automatically detects and
displays the CPU fan speeds in rotations per minute (RPM).
If the fan is not connected to the motherboard, it displays
N/A.
CPU Voltage, 1V voltage, 5V voltage, VCORE, etc
The onboard hardware monitor automatically detects the
voltage output through the onboard voltage regulators.
Smart Fan Mode Configuration
It allows you to configure the smart fan feature. You
can manually turn on the CPU fan or set the target CPU
temperature at which the CPU fan will start running if the
fan is not yet turned on. And the CPU fan can also be turned
off automatically if the temperature for the CPU is at or
below the specified value. Refer to
Item
Selection
Manual
Mode
Manually set the fan speed from 0 (lowest)
speed to 255 (highest speed)
Smart Fan
Control:
It presets the target system temperature
(degree Celcius) at which the system fan
will start running if the fan is not yet turned
on with this mode. And the system fan
can also be turned off automatically if the
temperature for the system is at or below
the specified value. This feature specifies
the temperature with the corresponding fan
speed but it may vary depending on model
specifications.
Note:
The default value is the recommended
settings as it has been tested operational in our
lab.
