Lanner FW-7526, User Manual

Page: 18 / 75

Jumper Setting and Connector Pin-out
J4 : set the Reset Mode as Hardware (HW) Reset or Software (SW) Reset. (form : 1X3
2.54mm 3P DIP ). Default “short pins” are 2-3 as Software Reset
JBAT1: CMOS Clear. The default “Short Pins” are 1-2 as “Normal”. ( 1X3 2.54mm
3P DIP ). When pins 2-3 are short, CMOS clear will be activated.
USB1 : Dual USB connectors in double-stacked form
1 HW Reset
2 Switch input (default 1-2)
3 SW Reset
Pin Description
1 VBAT
2 PCH_RTCRST_N
3 GND
Pin Description Pin Description
1 +P5V_USB0_L 5 +P5V_USB0_L
2 USB0_SB_L_DN 6 USB1_SB_L_DN
3 USB0_SB_L_DP 7 USB1_SB_L_DP
4 GND 8 GND
1
3
1
3