EAI-I130 User Manual
26
The system supports one M.2 E-Key slot for a Wi-Fi module card, an optional accessory. Wi-Fi module requires
two antennas. Please follow the steps to install the Wi-Fi module card.
1. Power off the system, turn the system
around, and open the bottom chassis cover.
2. Locate the M.2 E-Key slot on the
motherboard.
3. Next, thermal pad placement. Remove the
protective film on the thermal pad (included
in accessory pack) and gently place on the
motherboard. The thermal pad needs to be
underneath the module card.
3. Align the notch of the Wi-Fi module card with
the socket key in the pin slot.
4. Insert the Wi-Fi module card pins at 30
degrees into the socket until it is fully seated.
5. Push down on the module card and secure it
with one screw.
Notch
