Lanner electronics PC/104 Single Board Computer with STPC Atlas CPU, and VGA, LCD, LAN, SSD, on-board RAM, 4xCOM,..., User Manual

Page: 34 / 44

Chapter 3 BIOS Setup
30 User’s Manual
3.8 PnP/PCI Configuration
Both the ISA and PCI buses on the CPU card use system IRQs & DMAs. You must set up the IRQ and DMA
assignments correctly through the PnP/PCI Configuration Setup utility; otherwise the motherboard will not
work properly.
PnP/PCI Configuration Setup Screen
Phoenix – Award BIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data [Disabled] Item Help
Menu Level
!
Resources Controlled By [Manual]
!
IRQ Resources [Press Enter]
!
DMA Resources [Press Enter]
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
# $ % &
Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Reset Configuration Data: Normally, you leave this field
Disabled
, Select
Enabled
to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot.
The settings are: Enabled and Disabled.
Resources Controlled By: The Award Plug and Play BIOS has the capacity to automatically configure all of
the boot and Plug and Play compatible devices. However, this capability means absolutely nothing unless you
are using a Plug and Play operating system such as Windows
 98. If you set this field to Manual choose
specific resources by going into each of the sub menu that follows this field (a sub menu is proceeded by a
!
).
The settings are Auto (ESCD), Manual.