AWARD BIOS SETUP
~ 41 ~
AGP-4X Mode :
This item is used to enable or disable the AGP support for AGP-4x
mode.
AGP Driving Control :
This item allows you to adjust the AGP driving force. Choose
Manual to key in a AGP Driving Value in the next selection. This field is recommended to
set in “Auto” for avoiding any error in your system. The default setting is “Auto”.
AGP Driving Value :
This item allows you to adjust the AGP driving force.
AGP Fast Write :
This item allows you to write AGP data faster.
OnChip USB :
Set this option to “Enabled” or “Disabled” the onchip USB controller. The
default setting is “Disabled”.
USB Keyboard Support :
Set this option to “Enabled” or “Disabled” the USB keyboard/
mouse support. The default setting is “Disabled”.
OnChip Sound :
This item allows you to control the onboard AC 97 audio.
OnChip Modem :
This item allows you to control the on board MC 97 modem.
CPU to PCI Write Buffer :
When this field is “Enabled”, writes from the CPU to the PCI
bus are buffered, to compensate for the differences between the CPU and the PCI bus.
When Disabled, the writes are not buffered and the CPU must wait until the write is
complete before starting another cycle. The default setting is “Enabled”.
PCI Dynamic Bursting :
This item allows you to enable or disable the PCI dynamic
bursting function. The settings are “Enabled” or “Disabled”.
PCI Master 0 WS Write :
When enabled, writes to the PCI bus and are executed with
zero wait states. The settings are “Enabled” or Disabled”.
PCI Delay Transaction :
The chipset has an embedded 32-bit posted write buffer to
support delay transactions cycles. Select “Enabled” to support compliance with PCI
specification version 2.1. The settings are “Enabled” or “Disabled”.
PCI#2 Access #1 Retry :
When disabled, PCI#2 will not be disconnected until access
