Page:32
Power Management:
This option allows you to determine if the values in power management are disabled,
user-defined, or predefined.
Disable (Default)
No power management Disables all four modes
Min Power Saving
Minimum power management. Doze Mode=1hr. Sandy
Mode=1hr., Suspend Mode=1hr., and HDD Power
Down=15min.
Max Power Saving
Maximum power management. –Only available for SL CPU’s
Doze Mode=1mm., Standby Mode=1min., Suspend
Mode=1min., and HDD Power Down=1mm.
User Defined
Allows you to set each mode individually. When not
disabled. Each of the ranges are from 1min. to 1hr. except
for HDD Power Down which ranges from 1min to 15min. and
disabled.
Video Off Method:
This determines the manner in which the monitor is blanked. The default
setting is “V/H SYNC+Blank”.
V/H
SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blank to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Videos Off in Suspend:
This determines the manner in which the monitor is blanked. The
setting are: Yes and No.
Suspend Type:
Select the suspend Type. The settings are: PWRON Suspend, Stop Grant.
MODEM Use IRQ:
Name the interrupt request (IRQ) line assigned to the modem (if any) on
your system. Activity of the selected IRQ always awakens the system. The default setting is
“N/A”.
Suspend Mode:
Option are from “1 Min” to “1 Hour” and “Disable”. The CPU clock will be
stopped and the video signal will be suspended, if no Power Management events occur for a
specified length of time. Full power function will return when a Wake-Up event is detected.
HDD Power Down:
Options are from “1 Min.” to “15 Min.” and “Disable”. The IDE hard drive
will spin down if it is not accessed within a specified length of time.
Soft-Off by PWR-BTN:
Pressing the power button for more than 4 seconds forces the system
to enter the Soft-Off state. The settings are: “Delay 4 Sec.”, “Instant-Off”.
Power On by Ring:
When Enabled, an input signal on the serial Ring Indicator (RI) line (in
other words, an incoming call on the modem) awakens the system from a soft off state.
USB KB Wake-UP From S3:
This option is use to Enabled/Disabled USB Keyboard wake up
with suspend to RAM.
Summary of Contents for IAC-H668 Series
