background image

AWARD BIOS SETUP 

 

 

~30~ 

DRAM Clock: 

The chipset support synchronous and asynchronous mode between the 

host clock and DIMM clock. 
Host CLK (default) 

DIMM clock equal to host clock 

66MHz 

DIMM clock equal to 66MHz 

 

SDRAM Cycle Length: 

This item allows you to select the SDRAM cycle length.  The 

settings are 2 or 3. 

 

Memory Hole: 

In order to improve performance, certain space in memory can be 

reserved for ISA cards.  This memory must be mapped into the memory space below 
16MB. 
Enabled  

Memory hole supported 

Disabled (default) 

Memory hole not supported 

 

P2C / C2P Concurrency: 

This item allows you to Enable or Disable the PCI to CPU, CPU 

to PCI concurrency.    The default setting is “Enabled”. 
 

System BIOS Cacheable: 

Selecting “Enabled” allows caching of the system BIOS ROM 

at F0000h – FFFFFh, resulting in better system performance.    However, if any program 
writes to this memory area, a system error may result.    The settings are “Enabled” and 
“Disabled”. 
 

AGP Aperture Size: 

Select the size of the Accelerated Graphics Port (AGP) aperture.  

The aperture is a portion of the PCI memory address range dedicated for graphics 
memory address space.  Host cycles that hit the aperture range are forwarded to the 
AGP without any translation. 
 

AGP Driving Control: 

This item allows you to adjust the AGP driving force.  Choose 

Manual to key in a AGP Driving Value in the next selection.    This field is recommended to 
set in “Auto” for avoiding any error in your system.    The default setting is “Auto”. 
 

AGP Driving Value: 

This item allows you to adjust the AGP driving force. 

 

AGP Fast Write: 

This item allows you to write AGP data faster. 

 

Power-Supply Type:   

 

OnChip USB: 

Set this option to “Enabled” or “Disabled” the onchip USB controller.    The 

Summary of Contents for IAC-F694 Series






























































Reviews: