Lanner electronics EM-535 Series, Manual

Page: 50 / 69

AWARD BIOS SETUP
EM-535 / 44
3.8 L
OAD
BIOS D
EFAULTS
The BIOS defaults have been set by the manufacturer which represent settings provided with the
minimum requirements for your system to operate. “ Load BIOS Defaults “ loads the troubleshooting
default values permanently recorded in the BIOS ROM. These settings are non-optimal and turn off all
high performance features.
The Standard CMOS Setup screen is not affected. To use this feature, highlight it on the main screen
and press <Enter>. A line will appear asking if you want to load the BIOS default values. Press the
<Y> key and the <Enter>. The default settings will load. Press <N> if you do not want to proceed.
ROM PCI / ISA BIOS (2A434L7H)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SET\\UP
EXIT WITHOUT SAVING
ESC : Quit
á â à ß
: Select Item
F10 : Save & Exit Setup (Shift) F2 : Change Color
Time, Date, Hard Disk Type....
3.9 L
OAD
S
ETUP
D
EFAULTS
“LOAD SETUP DEFAULTS” loads the optimal settings which are stored in BIOS ROM. The defaults
loaded affect only the BIOS Features Setup, Chipset Features Setup, Power Management Setup,
PnP/PCI configuration setup and Integrated Peripherals Setup. There is no effect on the Standard
CMOS Setup. To use this feature, highlight the entry on the main screen and press <Enter>. A line will
appear on the screen asking if you want to load the Setup default values. Press the <Y> key and then
press the <Enter> key if you want to load the Setup defaults. Press <N> if you do not want to
proceed.
Load BIOS Default (Y/N)? Y