Lanix LX700R, Service Manual

Page: 13 / 50

17" CDT Color Monitor Lanix LX700R
13
VT V.Focus EG EW Gain
9300 9300 COLOR TEMPERATURE HP H-SIZE-PHASE
6500 6500 COLOR TEMPERATURE TC Top corner
BI SET BURN-IN SB Brightness Select
Auto Color LH Brightness Save
Auto configure Sharpness
AB ABL RETURN
VB V-LINEARITY HT H.EHT Gain
Phase
D. To switches the input signal to the other Timing Mode. Please follow step C ~ D to get the optimum
picture.
E. Select the " " RETURN function and press the MENU Key, then the Factor Preset window will be
returned to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, PIN-BALANCE, PARALLELOGRAM, ROTATION,
COLOR TEMPERATURE are common mode saved in the memory. Don't needed adjust it individual at
every timing Mode and save in the memory.
4.3.2. White Balance adjustment
A. Press MENU Key to show OSD menu, and press the down Key to select the "zoom" function, then press
the menu Key to enter second menu, press the down key to select “ “about 10S,then enter into factory
setting area for modulation.
B. Set the brightness and contrast max.
C. Raster max adjustment: Raster pattern, adjust R or G or B bias, make x=271, y=301, Y=3.5
±
0.2 cd/m
2
.
D. Raster cut off adjustment: Raster pattern, adjust brightness and cut off for 0.10
±
0.02 cd/m
2
, and save it
into 9300K and 6500K color temperature.
E. Small white screen appears, Raster cut off, SB set 1, LH set 1, adjust R or G or B gain, make x=283,
y=297
，
Y=150cd/ m
2
, save it into 9300 K color temperature, adjust R or G or B gain, make x=313,
y=329,Y=140cd/ m
2
, save it into 6500 K color temperature.
F. Full white screen appears, brightness cut off, when LH set 1, adjust factory AB value, make 9300K color
temperature Y=95±1 cd/m
2
. When LH set 2, Y=100±1 cd/m
2
. When LH set 3, Y=105±1 cd/m
2
. When LH set 4,
Y=110±1 cd/m
2
.
G. After modulation, it’s necessary to check if the white balance accords with the normal specification. If not,
needs reset. Then exit factory-setting area.