MATERIAL SAFETY DATA SHEET
Page 2 of CP-320
Information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions.
On the basis of the data available to us, this product is not a dangerous substance. One should, however, observe the usual precautionary m easures
for dealing with chemicals.
Miscellaneous:
Do not handle in windy areas. Flying powder may enter eyes. Minimize inhalation of dust. Cleanse skin thoroughly
after contact, before breaks and meals, and at end of work periods.
Section 8: Exposure Control and Personal Protection Information:
Respiratory Protection: none required under normal use. Hand Protection: none required under normal use.
Eye Protection: none required under normal use.
Ventilation: Local exhaust equipment is needed. Skin Protection: none required under normal use.
Section 9: Physical and Chemical Properties
CHARACTERISTICS:
Appearance:
Magenta
Melting point:
Approx. 110
°
C
Form:
Powder
Vapor pressure:
n/a
Odor:
Slight plastic odor
Vapor density:
n/a
Solubility in Water:
Insoluble
Evaporation rate:
n/a
Bulk density:
~1.2
Boiling point:
n/a
Section 10: Stability and Reactivity
Conditions to avoid: none Materials to avoid: none Stability: Stable
Hazardous decomposition products: CO and CO2 and other decomposition products when burned.
Section 11: Toxicological Information:
Ames test negative
Acute oral toxicity: (rat) 5g/kg
Section 12: Environmental / Ecological Information
None
Section 13: Disposal Consideration
Used Toner should be disposed of under conditions that meet all federal, state and local environmental regulations. Disposal regulations vary
from locality to locality, therefore consult your local Lanier office or the EPA to determine the proper method for disposal. Do not incinerate loose
or spilled Toner.
Section 14: Transportation Information
None. This is not a hazardous product.
Section 15: Regulatory Information
none
Section 16: Miscellaneous Information
Judgment as to the suitability of information contained herein for user’s purposes is the responsibility of the purchaser. Therefore, although
reasonable care has been taken in the preparation of this information, Lanier Worldwide, Inc. extends no warranties, makes no representations,
and assumes no responsibility as to the accuracy or suitability of such information for application to user’s intended purposes or for
consequences of its use. All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we do not guarantee that these are the only hazards that exist.
