Connecting the Machine
22
1
Settings Required to Use Scan to Folder Function
This section describes necessary set items for sending file.
Ethernet
This section describes necessary set items for sending file with ethernet cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Note
❒
As to
[
Effective Protocol
]
, check if the protocol to use is set as
[
Active
]
.
❒
[
LAN Type
]
is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Heading
Setting Item
Setting Requirements
interface settings/Network
Machine IPv4 Address
Mandatory
interface settings/Network
IPv4 Gateway Address
Mandatory
interface settings/Network
DNS Configuration
As required
interface settings/Network
DDNS Configuration
As required
interface settings/Network
Domain Name
As required
interface settings/Network
WINS Configuration
As required
interface settings/Network
Effective Protocol
Mandatory
interface settings/Network
Ethernet Speed
As required
interface settings/Network
LAN Type
Mandatory
interface settings/Network
Permit SNMPv3 Communication
As required
interface settings/Network
Permit SSL/TLS Communication
As required
interface settings/Network
Host Name
As required
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required
Summary of Contents for LD1110
Page 14: ...6...
Page 180: ...Printer Features 172 5...
Page 189: ...Address Book 181 7 Folder You can register the protocol path name and server name SMB FTP NCP...
Page 248: ...Other User Tools 240 8...
