Lanier 5613, Operator'S Manual, Page: 29 / 86

17
2. Copying
Basic Procedure
AAAA
Make sure that the machine is in
Copy mode.
Note
❒
If not, press the
{{{{
Copy
}}}}
key.
BBBB
If the machine is set for User
Code, enter the code with the
number keys, and then press the
{{{{
OK
}}}}
key. See p.31 “User Codes”.
CCCC
Make sure that there are no previ-
ous settings remaining.
Note
❒
To clear settings, press the
{{{{
Clear Modes
}}}}
key.
DDDD
Place your originals.
Reference
See p.19 “Placing Originals”.
EEEE
Make the desired settings.
FFFF
Enter the number of copies re-
quired with the number keys.
Note
❒
The maximum copy quantity
can be set between 1 and 99 (de-
fault:
99 ). See “1. Max. Copy
Q'ty” in p.56 “Copier Features”.
❒
To change the number entered,
press the
{{{{
Clear/Stop
}}}}
key, and
then enter the new number.
GGGG
Press the
{{{{
Start
}}}}
key.
The machine starts copying.
Note
❒
To stop the machine during the
m u l t i - c o p y r u n , p r e s s t h e
{{{{
Clear/Stop
}}}}
key.
❒
To return the machine to the ini-
tial condition after copying,
press the
{{{{
Clear Modes
}}}}
key.
-
- -
-
System Reset
The machine returns to its prioritized
mode automatically after your job is
finished, after a certain period of
time. This function is called “System
Reset”.
Note
❒
You can change the System Reset
time. See “3. System Reset” in the
System Settings manual.
StellaC-EN-CopyF_V4_FM.book Page 17 Wednesday, July 4, 2001 11:23 AM