Langport LPT-1006 User Instructions Download

Page: 2 / 12

Thank you for purchasing this Langport Lighting outdoor hanging lantern. This product has
been manufactured with the highest standards of safety and quality.

FEATURES:

•

Easy to install

•

Solid cast aluminum resists elements.

•

For energy savings this fixture has been engineered to safely use a Self Ballasted
Compact Fluorescent Lamp in place of an incandescent lamp.

• Questions, Problems, Missing Parts? Please contact our Customer Service Team at 1-

877-698-2157. Customer service hours are Monday through Friday, between 8 AM and
5 PM Pacific time.

You may also contact us via fax at 1-310-886-3719 or e-mail at

I f @L

tli hti

GENERAL:

[email protected].

• KEEP this instruction manual.
• KEEP your receipt for proof of purchase.

TOOLS AND ITEMS REQUIRED FOR INSTALLATION AND

TOOLS AND ITEMS REQUIRED FOR INSTALLATION AND
ASSEMBLY (NOT INCLUDED):

SAFETY

GOOGLES

#2 PHILIPS

SCREWDRIVER

PLIERS

Page 2

WIRE STRIPPERS

ELECTRICAL TAPE

WIRE CUTTERS

LIGHT BULB

(100 WATT MAX

OR CFL

EQUIVALENT)

Page 2

Summary of Contents for LPT-1006













Search results

Summary of Contents for LPT-1006

Reviews:

Related manuals for LPT-1006

Brands by name

Popular brands

Langport LPT-1006, User Instructions

Search results

Summary of Contents for LPT-1006

Reviews:

Related manuals for LPT-1006

Brands by name

Popular brands