6 / 13
5 Conversion instructions
1. Please remove all parts from the packaging and check you have all the required parts according to
the parts list.
2. Remove old drive motor, belt and spreading shank actuator (leave the sliding nuts in the track, as
these will be used again)
3. Remove old pulleys (plastic) on spreading shank and attach reversing lever (Pos. 11) to the spread-
ing shank (see also Figure 3: Schindler Varidor10 post-conversion: Spreading shank / door panel
coupler)
4. Attach pulleys to the reversing lever.
5. Mount the TSG drive motor on the large combi-bracket.
6. Mount the TSG end stopper on the large combi-bracket.
7. Mount curved plate (Pos. 3) on the flat bracket for curved plate (Pos. 4).
8. Mount the flat bracket for curved plate (Pos. 4) with the help of a 90° bracket (Pos. 5) and spacer
(Pos. 6) on the base mounting plate (with mounting link for curved plate) (Pos. 2).
9. Mount large combi-bracket on the base mounting plate (with mounting link for curved plate) (Pos. 2)
and attach to the aluminium track on the door automation (see also Figure 2: Schindler Varidor10
post-conversation: Curved plate for shank)
10. Mount slim combi-bracket (Pos. 7) on the opposite side mounting plate (Pos. 8).
11. Mount counter pulley with tension device on slim combi-bracket (Pos. 7).
12. Mount TSG end stopper with the short bracket end stopper (Pos. 9) on the narrow combi-bracket
(Pos. 7).
13. Attach opposite side mounting plate (Pos. 8) to the aluminium track on the door automation (see also
Figure 4: Schindler Varidor10 post conversion: Opposite side).
14. Attach door panel coupler to the door panel.
15. Fit toothed belt, connect to the belt coupling and tighten with the tension device on the opposite side.
16. Position stoppers (buffers).
17. Attach pulleys to curved plate and reversing lever, so that the spreading shank only shuts the door to
the closed position in the final moment of the door movement.
18. Please refer to the TSG instruction manual enclosed for information regarding the set-up of the elec-
trics.
