background image

19

WARRANTY

Lang Manufacturing Limited Warranty
to Commercial Purchasers*

(Domestic U.S., Hawaii, & 
Canadian Sales only.)

Lang Manufacturing Equipment (“Lang
Equipment”) has been skillfully manufactured,
carefully inspected and packaged to meet rigid
standards of excellence.  Lang warrants its
Equipment to be free from defects in material and
workmanship for (12) twelve consecutive months,
with the following conditions and subject to the
following limitations.

I.

  This parts and labor warranty is limited to Lang

Equipment sold to the original commercial
purchaser/users (but not original equipment
manufacturers), at its original place of installation, in
the continental United States, Hawaii and Canada.

II.

  Damage during shipment is to be reported to the

carrier, is not covered under this warranty, and is the
sole responsibility of purchaser/user. 

III.

  Lang, or an authorized service representative,

will repair or replace, at Lang’s sole election, and
Lang Equipment, including but not limited to, safety
valves, gas and electric components, found to be
defective during the warranty period.  As to
warranty service in the territory described above,
Lang will absorb labor and portal to portal
transportation costs (time & mileage) for the first
(12) twelve months from the date of installation or
eighteen (18) months from date of shipment from
Lang Manufacturing, which ever comes first.

IV.

  This warranty does not cover routine general

maintenance, periodic adjustments, as specified in
operating instructions or manuals, and consumable parts,
or labor costs incurred for removal of adjacent
equipment or objects to gain access to Lang Equipment.
This warranty does not cover defects caused by improper
installation, abuse, careless operation, or improper
maintenance of equipment.

V.

  

THIS WARRANTY IS EXCLUSIVE AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, EACH
OF WHICH IS HEREBY EXPRESSLY DISCLAIMED.
THE REMEDIES DESCRIBED ABOVE ARE
EXCLUSIVE AND IN NO EVENT SHALL LANG BE
LIABLE FOR SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR THE BREACH OR
DELAY IN PERFORMANCE OF THIS WARRANTY.

VI.

  Lang Equipment is for commercial use only. If sold

as a component of another (OEM) manufacturer’s
equipment, or if used as a consumer product, such
Equipment is sold AS IS and without any warranty.

Summary of Contents for XL-24 Electric Clamshell




















Reviews: