4
3.1 Assembly
If several Quick•Point
®
Modular Plates are interconnected, the corresponding mounting
holes must be available for the particular machine table and the relevant covers must be
removed on the connection ends.
Plate 1 (pos. 1) includes the caps for the connectors (pos. 2) as well as the cover of the
through-hole (pos. 3).
The connecting plate 2, which is to be connected in series (pos. 4), includes a cap for the
connectors (pos. 2) as well as the tightening screw (pos. 5) and the actuation bolt (pos. 6),
which also need to be removed.
Chap
ter 3
3 Design and Function
pos. 1
pos. 4
pos. 2
pos. 2
pos. 3
pos. 5
pos. 6