Lang ET-PFD350, Installation Manual

Page: 4 / 11

4.
Place the frame on the projector so that it is
aligned with the screw hole positions.
(Make sure that the forward/back direction is
correct when installing. If the direction is reversed,
the hole positions will not match.) The screw holes are marked as follows:
Please make sure to use
ONLY
the
correspondent screw holes when
installing a projector!
Secure the projector in the frame using the eight
Do not forget to use the washers as they are
responsible for the galvanic isolation.
Torque: 4 ± 0.5 Nm
screw (M6x20)
INSTALLING THE PROJECTOR IN THE FRAME
=
PT-DZ13K
PT-DS12K
PT-DW11K
PT-DZ10K
PT-DZ8700
PT-DS8500
PT-DW8300
=
PT-DZ870
PT-DW830
PT-DX100
=
PT-DX810S
PT-DZ770K
PT-DW740S
PT-DW730
PT-DZ680
PT-DW640
PT-DX610
PT-DZ6710
PT-DZ6700
PT-DW6300S
PT-D6000
PT-D5000
6 screws 7 screws 5 screws
2
=
PT-RZ670
PT-RW630
5 screws