background image

6

UNPACKING

3.1 Receiving the Griddle

Upon receipt, check for freight damage, both visible and concealed.  Visible
damage should be noted on the freight bill at the time of delivery and signed by the
carrier's agent.  Concealed loss or damage means loss or damage which does not
become apparent until the merchandise has been unpacked.  If concealed loss or
damage is discovered upon unpacking, make a written request for inspection by the
carrier's agent within 15 days of delivery.  All packing material should be kept for
inspection.  Do not return damaged merchandise to Lang Manufacturing Company.
File your claim with the carrier.

3.2 Location

Prior to un-crating, move the griddle as near its intended location as practical.  The
crating will help protect the unit from the physical damage normally associated
with moving it through hallways and doorways.

3.3 Un-crating

The griddle will arrive completely assembled inside a wood frame covered by
cardboard box and strapped to a skid.  

Remove the cardboard cover, cut the straps

and remove the wood frame.  

CAUTION:

GRIDDLE WEIGHS 405 lbs (183.71 kg).  FOR SAFE
HANDLING, INSTALLER SHOULD OBTAIN HELP AS
NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.

CAUTION:

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH
GRIDDLE WILL BE LOCATED MUST BE DESIGNED TO
SUPPORT THE WEIGHT OF THE GRIDDLE.

CAUTION:

SHIPPING STRAPS ARE UNDER TENSION AND CAN
SNAP BACK WHEN CUT.

Remove griddle from skid and place in intended location.

Summary of Contents for Cruise CLG-36B-S




















Reviews: