5
UNPACKING
CAUTION
THE RANGE IS EXTREMELY HEAVY. FOR SAFE HANDLING, INSTALLER
SHOULD OBTAIN HELP AS NEEDED OR EMPLOY APPROPRIATE
MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY OR
PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO
THE PLACE OF INSTALLATION.
CAUTION
ANY STAND, COUNTER OR OTHER DEVICE ON WHICH RANGE WILL BE
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE
RANGE.
Receiving the Range
Upon receipt, check for freight damage, both visible and concealed. Visible
damage should be noted on the freight bill at the time of delivery and signed by the
carrier's agent. Concealed loss or damage means loss or damage which does not
become apparent until the merchandise has been unpacked. If concealed loss or
damage is discovered upon unpacking, make a written request for inspection by the
carrier's agent within 15 days of delivery. All packing material should be kept for
inspection. Do not return damaged merchandise to Lang Manufacturing Company.
File your claim with the carrier.
Location
Prior to un-crating, move the range as near to its intended location as practical.
The crating will help protect the unit from the physical damage normally associated
with moving it through hallways and doorways.
Un-crating
Uncrate range as close to installation location as possible. The range is packaged
on a pallet, wrapped in plastic to protect the unit from moisture and surrounded by a
wooden frame. Remove the wood crating carefully. Improper use of tools can
result in damage to the equipment. Remove and discard the plastic wrap.
Desiccant bags on top of the range should also be discarded. Protective paper on
top of the range may be left until the installation is complete.
The range is raised on blocks to enable ease of handling when removing from the
pallet with forklift or straps. Use extreme care regardless of method used and be
aware of gravity center, especially with banks of multiple units.
PLEASE NOTE:
Legs, manuals, racks, rack slides, griddle cleaning tools, fryer smother covers and
remote overhead switch boxes, where applicable, are packed inside the cabinet
cavity and should remain there until the unit is at the final installation location.
Desiccant bags have been placed inside electrical cavity and must be removed
before operation.
Summary of Contents for CLCN36-H-S
Page 11: ...11 EXPLODED VIEW...
Page 12: ...12 EXPLODED VIEW Cont d...
Page 13: ...13 WIRING DIAGRAM...
Page 14: ...14 NOTES...