Lang 500S-A, Service Manual

Page: 7 / 20

6
START-UPS
500 Series Range
1) Verify connections at plug and terminal block.
2) Incoming Volt - Single Phase L1-L2______
Three Phase L1-L2______ L2-L3______ L3-L1______
3) Amp draw L1______
L2______
L3______
4) Verify actual oven temperature at 350
°
F ________
°
F.
Note: Install thermocouple wire in center of oven and set Top 3-heat switch for HI and the Bottom
3-heat switch for LOW and let oven cycle for a minimum of three times.
Model #_______ Date_______ Serial #________
Store #___________ Tech Name___________________
Contact_______________ Company _________________________
Store Phone #___________ Service Company Phone #______________
Address_____________________
______________________
______________________