10
INSTALLATION CONT’D
Converting Double Connection to Single Connection
Remove the two rear access panels from the griddle
Remove the wires from the envelope labeled “Single connection jumpers”
Determine which end of the griddle the main power supply connection will enter.
Call this end terminal block 1
Insert the main power supply wires into the open side of this terminal block.
Insert one each of the three wires provided into the side of terminal block 1 which contain the wires that come
from the griddle
Pull the other end of the wires over to the terminal block located at the other power connection.
Insert the wires into the open side of the terminal block as indicated below.
Ensure that all the terminal block screws are securely tightened
From
Terminal Block 1
To
Terminal Block 2
L1
To
L2
L2
To
L3
L3
To
L1
L3
L2
L1
WIRES TO GRIDDLE
TERMINAL BLOCK 1
3 EA. # 8 WIRES PROVIDED IN KIT
L3
L2
L1
TERMINAL BLOCK 2
WIRES TO GRIDDLE
