Laney Nexus FET NXF Operating Instructions Manual Download Page 3

Page 3 /20

BEFORE SWITCHING ON

After unpacking your amplifier check that it is factory fitted with a three pin 

'grounded' (or earthed) plug.  Before plugging into the power supply ensure you 

are connecting to a grounded earth outlet.

If you should wish to change the factory fitted plug yourself, ensure that the wiring 
convention  applicable  to  the  country  where  the  amplifier  is  to  be  used  is  strictly 
conformed  to.   As  an  example  in  the  United  Kingdom  the  cable  colour  code  for 
connections are as follows.

NOTE

This manual has been written for easy access of information.  The front and rear 
panels are graphically illustrated, with each control and feature numbered.  For a 
description of the function of each control feature, simply check the number with 
the explanations adjacent to each panel.

Your Laney amplifier has undergone a thorough two stage, pre-delivery inspection, 
involving actual play testing.
When you first receive your Laney guitar amplifier, follow these simple procedures:

(i) Ensure that the amplifier is the correct voltage for the country it is to be used in.

ii) Connect your instrument with a high quality shielded instrument cable.  You 
have probably spent considerable money on your amplifier and guitar - don’t use 
poor quality cable it won’t do your gear justice.

Please retain your original carton and packaging so in the unlikely event that some 
time in the future your amplifier should require servicing you will be able to return it 
to your dealer securely packed.

Care of your Laney amplifier will prolong it's life.....and yours!

                                     

EARTH or GROUND GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN

CAUTION:

WARNING:

Intended to alert the user to the presence of uninsulated ‘Dangerous Voltage’ 
within the products enclosure that may be sufficient to constitute a risk of 
electrical shock to persons.

Ce symbole est utililise pur indiquer a l’utilisateur de ce produit de tension non-
isolee dangereuse pouvant etre d’intensite suffisante pour constituer un risque 
de choc electrique.

Este simbolo tiene el proposito de alertar al usuario de la presencia de ‘(voltaje) 
peligroso’ que no tiene aislamiento dentro de la caja del producto que puede 
tener una magnitud suficiente como para constituir riesgo de corrientazo.

Dieses Symbol soll den Anwender vor unsolierten gefahrlichen Spannungen 
innerhalb des Gehauses warnen, die von Ausrichender Starke sind, um einen 
elektrischen Schlag verursachen zu konnen.

Intended to alert the user of the presence of important operating and 
maintenance (Servicing) instructions in the literature accompanying the product.

Dieses Symbol soll den Anwender vor unsolierten gefahrlichen Spannungen 
innerhalb des Gehauses warnen, die von Ausrichender Starke sind, um einen 
elektrischen Schlag verursachen zu konnen.

Este simbolo tiene el proposito de la alertar al usario de la presencis de 
instrucccones importantes sobre la operacion y mantenimiento en la literatura 
que viene conel producto.

Dieses Symbol soll den Benutzer auf wichtige Instruktionen in der 
Bedienungsanleitung aufmerksam machen, die Handhabung und Wartung des 
Produkts betreffen.

Risk of electrical shock - DO NOT OPEN.

To reduce the risk of electrical shock, do not remove the cover.  No user 
serviceable parts inside.  Refer servicing to qualified personnel.

Risques de choc electrique - NE PAS OUVIRIR

Afin de reduire le risque de choc electrique, ne pas enlever le couvercle. II ne 
se trouve a l’interieur aucune piece pouvant etre reparee par l’utilisateur.  
Confier l’entretien a un personnel qualifie.

Riesgo de corrientazo - no abra

Para disminuir el risego de carrientazo, no abra la cubierta. No hay piezas 
adentro que el pueda reparar. Deje todo mantenimiento a los tecnicos 
calificadod.

Risiko - Elektrischer Schlag! Nicht offen!

Um das Risiko eines elektrischen Schlages zu vermeiden, nicht die Abdeckung 
enfernen. Es befinden sich keine Teile darin, die vom Anwender repariert 
werden Konnten. Reparaturen nur von qualifiziertem Fachpersonal durchfuhren 
lassen.

To prevent electrical shock or fire hazard, do not expose this appliance to rain 
or moisture.  Before using this appliance please read the operating instructions 
for further warnings.

Afin de prevenir les risques de decharge electrique ou de feu, n’exposez pas 
cet appareil a la pluie ou a l’humidite.  Avant d’utiliser cet appareil, lisez les 
advertissments supplentaires situes dans le guide.

Para evitar corrientazos o peligro de incendio, no deja expuesto a la lluvia o 
humedad este aparato Antes de usar este aparato, lea mas advertcias en la 
guia de operacion.

Um einen elektrischen Schalg oder Feuergefahr zu vermeiden, sollte dieses 
Gerat nicht dem Regen oder Feuchtigkeit ausgesetzt werden. Vor 
Inbetriebnahme unbedingt die Bedienungsanleitung lesen.

PRECAUCION:

ADVERTENCIA:

ATTENTION:

ADVERTISSEMENT:

VORSICHT:

ACHTUNG:

X

F
N

E

T

F

Summary of Contents for Nexus FET NXF





















Reviews: