Laney LX120H, User Manual, Page: 10 / 12

Supply Voltage ~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option
Mains Fuse ~220V>~240V = T1A L. ~100>~120V = T2A L
Power Consumption 300W
Output Power Rating 120W
Features Rugged construction
TEC Tube Emulating Technology
Headphone socket,
Twin speaker sockets
(Minimum 4 Ohm Impedance)
CD In (10K Input impedance) ( 750mV Input level)
FX Loop (Nominal 750mV Level)
Line Out (Nominal 750mV Level)
Footswitchable Yes, Channel and FX (FS2 Not included)
Digital Effects Programs: 2*Chorus, Delay, 4*Delays,
2* Flange, Octave, Delay,
Chorus, 2*Reverb, Rotary Sim.
EQ Both channels contain separate Passive Bass, Middle and Treble
Input Impedance 1MOhm/47pF
Size 247*680*240 (H*W*D)
Unit Weight 11.0 Kg
Packing Weight 12.4 Kg
XTS eXtreme Tone Shaping (Drive channel only)
Nominal
This product conforms to:
European EMC directive(2004/108/EC), Low Voltage Directive (72/23/EEC) and CE mark Directive (93/68/EEC)
Page 10 /12
Laney
OPERATING INSTRUCTIONS
Page 11 /12
Laney
OPERATING INSTRUCTIONS
SAMPLE SYSTEM
SPECIFICATIONS
and follow a pattern for turning on and off your equipment. With all system parts connected, turn
on source equipment, tape decks, cd players, mixers, effects processors etc. BEFORE turning on
your guitar amplifier. Many products have large transient surges at turn on and off which can
cause damage to your speakers. By turning on your guitar amplifier LAST and making sure its
Volume controls are set to minimum any transients from other equipment will not reach your
loudspeakers. Wait until all system parts have stabilised; usually a couple of seconds. Similarly
when turning off your system always turn down the Volume controls on your guitar amplifier and
then turn off its power before turning off other equipment.
Cables: never use shielded or microphone cable for any speaker connections as this will not be
substantial enough to handle the amplifier load and could cause damage to your amplifier system.
Caution: These professional loudspeaker systems are capable of generating very high sound
pressure levels. Use care with placement and operation to avoid exposure to excessive levels that
can cause permanent hearing damage. (Refer to guidelines on page 2)
Servicing: The user should not attempt to service these products. Refer all servicing to qualified
service personnel.
General Notes
Amplifier connection:
In order to
avoid damage, it is advisable to establish