In order to take full advantage of your new product and enjoy long and trouble-free performance,
please read this owner's manual carefully, and keep it in a safe place for future reference.
1). Unpacking:
On unpacking your product please check carefully for any signs of damage that may
have occurred whilst in transit from the Laney factory to your dealer. In the unlikely event that there
has been damage, please repack your unit in its original carton and consult your dealer. We strongly
advise you to keep your original transit carton, since in the unlikely event that your unit should
develop a fault, you will be able to return it to you dealer for rectification securely packed.
2). Amplifier Connection:
In order to avoid damage , it is advisable to establish and follow a pattern
for turning on and off your system. With all system parts connected, turn on source equipment, tape
decks, cd players, mixers, effects processors etc, BEFORE turning on your guitar amplifier. Many products
have large transient surges at turn on and off which can cause damage to your speakers.
By turning on your guitar amplifier LAST and making sure its level control is set to a minimum, any
transients from other equipment should not reach your loud speakers. Wait till all system parts have
stabilised, usually a couple of seconds. Similarly when turning off your system always turn down the
level controls on your guitar amplifier and then turn off its power before turning off other equipment
3). Cables:
Never use shielded or microphone cable for any speaker connections as this will not be
substantial enough to handle the amplifier load and could cause damage to your complete system.
4). Servicing:
The user should not attempt to service these products. Refer all servicing to qualified
service personnel
6
