Page 4
CHANNEL 2 TONE SWITCH
o
BRIGHT
–
Extends the high frequencies and slightly dulls the low-end.
o
DARK
–
Boosts the low-end frequencies adding some warmth to the tone whilst reducing the
power of the higher frequencies.
o
OFF
–
Middle setting results in no change to your signal from this switch.
The LOUDPEDAL’s built in passive EQ stack allows you to fine tune your sound
. As a starting point,
12’o clock
is the neutral setting for these and will provide you with a good starting point for further
tweaking.
•
BASS
–
Adjusts the strength of the low-end response of your output, for a deeper sound when
turned clockwise.
•
MIDDLE
–
Adjusts the strength of the mid-range response of your output, that when turned
clockwise gives a fuller sound.
•
TREBLE
–
Adjusts the strength of the top-end response of your output. Turning clockwise will
boost the brighter, higher notes.
The 3 EQs are all linked, meaning no matter how you change them, you will always have a musical
tone from the pedal. Feel free to experiment and find your favourite sound.
Using the footswitch on the right-hand side of the pedal, the boost pre-gain can be turned on and off.
An additional gain setting that acts as a boost pedal in front of your LOUDPEDAL, driving your signal
for more distortion. The LED just above the footswitch lights up when the boost is active, working on
both channels simultaneously.
