"ROCK THE FLOOR WITH HARDCORE"
1.
3
"ROCK THE FLOOR WITH HARDCORE"
The following hints and tips are provided so that you can get the best performance out of your Laney amplifier. These are only
guidelines and should be adapted for your own preferences:-
1: The position of an amplifier in a room has an effect upon the overall sound characteristics. If you wish to increase the bass
responce of your amplifier place the amplifier on the floor. If you wish to reduce the bass response of your amplifier place the
amplifier on a stand.
2: Do not place you amplifier hard up against a wall as this will reduce the air circulating around the back of the unit and may
result in overheating.
Maximum power consumption:
Supply voltage (Factory pre-set):
Supply
Frequency:
Output power:
Input impedance Hi & Lo:
Input sensitivity
Hi input:
Input sensitivity Lo input:
Line output level (nominal):
Line out
impedance:
Minimum External Speaker Impedance:
Speaker size:
Speaker rating:
50 Watts
115/230 Volts
50/60Hz
50 watts
1 Meg
5.5mV
5.5mV
-10dBU
<75 Ohms
4 Ohms
12"/250mm
70 watts.
*In the intrest of continuing product developement BLT Industries reserve the right to amend specifications without prior notice.
Maximum power consumption:
Supply voltage (Factory pre-set):
Supply
Frequency:
Output power:
Input impedance Hi & Lo:
Input sensitivity
Hi input:
Input sensitivity Lo input:
Line output level (nominal):
Line out
impedance:
Minimum External Speaker Impedance: 4
Speaker size:
Speaker rating:
50 Watts
115/230 Volts
50/60Hz
25 watts
1 Meg
5.5mV
5.5mV
-10dBU
<75 Ohms
Ohms
10"/250mm
30 watts.