Rear Panel Controls
8
GH50R-212
GH50R, GH100R
L Z B 1 2 3 4
L Z B 1 2 3 4
1. MAINS INLET SOCKET:
Connect to your power source. Make sure the voltage indicated on the rear panel is correct for
–
your country!
MAINS FUSE:
This drawer contains the main safety fuse for the unit. The fuse protects the amplifier from damage in the event of
–
fault by disconnecting the mains power supply. USE ONLY THE CORRECT SIZE AND RATING SPECIFIED ON THE PANEL. If a fuse blows
or fails and a replacement of the same size and rating is installed which in turn blows, the amplifier has suffered a malfunction and
needs immediate service from a qualified technician. DO NOT TRY A FUSE OF HIGHER RATING - Using a fuse that is too large in current
rating may cause serious, irreparable damage to the amplifier and presents a serious fire hazard. The mains fuse ratings are detailed in
the Specifications section of this manual, as well as printed on the rear of the amplifier. There is a spare fuse located in the fuse drawer
of the mains power inlet in the event of a failure.
2. HT FUSE
: This fuse disconnects the high voltage DC power to the tubes within the amplifier in the event of a fault. USE
–
ONLY THE CORRECT SIZE AND RATING FUSE AS SPECIFIED ON THE PANEL. If a fuse blows or fails and a replacement of the
same size and rating is installed which in turn blows, the amplifier has suffered a malfunction. At this point check the output tubes,
and replace faulty ones if required. Should the tubes not be the problem, refer the amplifier to a qualified service technician. DO
NOT TRY A FUSE OF HIGHER RATING - Using a fuse that is too large in current rating may cause serious, irreparable damage to
the amplifier. Fuses are designed to protect, do not take chances.
3.SERIAL NUMBER
:
–
Information area relating to the amplifier: Model Code, Serial Number, Fuse Type & Rating etc
Summary of Contents for GH50R
Page 1: ...GH50R GH100R GH50R 212...