Care of your
amplifier will prolong it's life.....and yours!. If you follow these guidelines your equipment will give you
years of playing pleasure
Laney
After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into
the power supply ensure you are connecting to a grounded earth outlet.
If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country where
the amplifier is to be used is strictly conformed to. As an example in the United Kingdom the cable colour code for
connections are as follows.
EARTH OR GROUND - GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN
220V
Laney
Congratulations on your decision to purchase a
amplifier.
products are designed with ease of operation as a primary objective, however to ensure you derive the best from your
new amplifier, it is important you take time to read this user manual and to familiarise yourself with the control functions and
facilities available
Laney
Laney
INTRODUCTION
BEFORE
SWITCHING ON
This manual has been written for easy access of information. The front and rear panels of each unit are graphically illustrated,
with each control and feature numbered. For a description of the function of each control feature, simply check the number
with the explanations adjacent to each panel.
Your
valve amplifier has undergone a thorough two stage, pre-delivery inspection, involving actual play testing, as well
as valve burn in. Valves are the most important component in your
valve amp. However they are also the most fragile
component. The glass envelope and valve filaments can easily be damaged in transit without any apparent signs of damage to
the box, amp or valves. Valve damage is however quite simple to diagnose and even more simple to remedy. These procedures
are explained later in this manual..
Laney
Laney
When you first recieve your
valve amp, follow these simple procedures:
(i) Ensure that the amplifier is set at the correct voltage for the country it is to be used in.
(ii) Ensure that the speaker is connected to the appropriate socket.
(iii) Connect your instrument with a high quality shielded instrument cable. Use of cheap cables will compromise the sound
of your instrument and your amplifier.
Laney
If there is a problem with your
valve amplifier
Laney
DON'T
DO
PHONE YOUR DEALER!
1
