T E X A S 2 . 0
50
MOUNTING
1° PASSAGE
1. Check that the shower tray is level.
2. Place the profile on the wall and use
the plumb level .
3. Mark the holes in the wall with a pen-
cil .
4. Drill the holes in the wall.
5. Insert the wall plug and tighten the
screws to secure the profile. Repeat
steps for the other profile.
IMPORTANT
it is good practice not to mount the
saloon door profiles close to the outer
edge of the shower tray, always leave
about 1 cm for an optimum aesthetic
and functional result.
1
2
3
5
4
D
A
8*30
