D. Install Axle Support With flat end of the support resting on top of the axle, install washer(12) and nut(15) secur
-
ing the support to the mid bed stud.Fully tighten.
E. Install the Steering Yoke:The straight leg of the yoke fits over the axle pin.The bent leg with two holes bolts to
the axle and to the steering link.
a. First,secure the yoke at the pin with a medium washer(13) and cotter pin(9).Bend the legs of the cotter pin.
b. Second, pass a bolt (10) down thru the yoke axle support,and front axle. Install a washer (12) and nut (15).
c. Repeat at the second hole bolting the yoke to the steering link Snug both bolts then loosen slightly to allow
for steering.
F. Install Rear Axle Attach the rear bed studs using two washers (12) and two nuts (15)
，
Fit the axle support over
the axle stud and secure using washer (12) and nut (15)
．
Fully tighten.
G. Install Wheels:Slide the wheels (7) onto the axles with the valve stem side facing out. Secure each wheel using
a lock washer (8) followed by a large washer (14) and secured by a cap nut (17)
．
Fully tighten.
H. Install handle:Install the handle (6) and plastic Coupling to the yoke (5) using long bolt (11),small washer (12)
and nut (15)
，
Don't over tighten
．
I. Install side fences:Turn the cart over onto its wheels, Install the sides
，
front and back fences using hinge pin(2)
J. Install fence left and right lock handles
2
Rear Axle
Axle Support
14
17
14
1
5
12
1
5
12
1
5
12
17
8
8
4
18
1
5
12
7
Side Fence(2pcs)
Front
fence(1pc)
Back Fence(1pc)
Left lock handles
2pcs
Bed (1 each)
1
Right lock handles
2pcs
Hinge Pin
(8 pcs)
2
23
25
24
27
26
27
Assemble 4 fences(part #25
，
#26
，
#27)
separately on bed (part #1) with Type B
Pin(part #2),then connect all the fences with
Left and Right Lock Handles(part #23
＆
24).
