ASI 211B HRD72
A
SSEMBLY
I
NSTRUCTIONS
Note:
Two people required to assemble. Before assembling the nuts to the bolts, we
recommend that a light oil or petroleum jelly be applied to the bolt threads. Protect
powder coated finish by assembling on a level, protected surface.
DO NOT SLIDE
OR DRAG PARTS.
1.
Attach the center section and supports to one end section at a time
2.
Align center section holes
above
end section holes as shown in Diagram #1
3.
Place bolts in holes and attach nuts on underside, with washers on both sides,
keeping nuts finger tight, as shown in Diagram #2
4.
Align support holes
above
end section holes as shown in Diagram #1. Repeat
step 3.
5.
Repeat steps 2, 3 & 4 with the remaining end section.
6.
Tighten all hardware. Retighten hardware two weeks after initial assembly.
Diagram #1
Diagram #2