page 4
P 800.521.2546 F 269.381.3455 www.landscapeforms.com
7. Connect the solar panel to the power
unit using the MC4 connectors .
8. Plug the luminaire into the LED
driver(s) using the weatherproof con-
nectors.
All electrical connections are complete at
this point.
9. Switch the circuit breaker to the on
position by pushing the plunger in
until the white strip is no longer
visible.
10. Switch the toggle switch to the on
position
10. Before re-installing power module lid
(removed in Step 1), Verify SOC
charge LEDs per table 3.
11. After SOC has been verified, secure
power module lid using six #10-32
fasteners.
The installation process is now complete.
USE EXTREME CAUTION WHEN INSTALLING
BATTERY HARNESS. ALWAYS WEAR INSULATING
GLOVES WHEN CONNECTING BATTERIES.
Kaleidoscope® smart shelter installation and maintenance manual
Installation
Circuit breaker shown in the off
position (white stripe visible).
Circuit breaker shown in the on
position (white stripe is hidden).
Switch shown in the off position
(Toggle pointed up).
Switch shown in the on position
(Toggle pointed down).
