Landoll Weatherproofer III 2310 Series, Operator'S Manual

Page: 53 / 80

ASSEMBLY INSTRUCTIONS
3-31
Rear Jack Installation
(2310-07-30) (Option)
An optional rear jack assembly is available to use on the
rear of the 2310-07-30 Weatherproofer III models. This is
extremely helpful if an attachment has been added to the
rear of the machine for stability.
1. Attach rear extended jack mount to the rear frame of
the Weatherproofer III using u-bolts and hex lock
nuts
(See Figure 3-25.)
IMPORTANT
The rear jack tube should be located to the rear of the
Weatherproofer III near the center of the frame.
2. Slide rear jack tube into rear extended jack mount
from the bottom and hold in desired location with
wing lock pin, 1/4 x 3 slotted roll pin, and 3/16 hair
pin.
Figure 3-25: Rear Jack Installation