Landoll Tilloll 877, Operator'S Manual

Page: 90 / 94

5-2 F-1072-0320
TROUBLESHOOTING GUIDE
SHANK SPRINGS BREAKING Spring pivot bolt too tight Spring pivot bolt must be loose enough
to allow spring plug to pivot so spring
is not forced to bend.
SCREW IN TOP OF SPRING
BREAKING Lock nut should be tightened against
shank bracket instead of spring plug Verify that there are three threads
between lock nut and spring plug.
PLUGGING IN SHANK AREA Shank placement not according to
specifications Check shank placement against
See
Figure 2-7
through
2-12
.
Ground too wet Wait until ground conditions are proper
for tillage.
REEL VIBRATING Rear of machine too deep Level machine by turning radius rod.
Running machine too slow Machine needs to be pulled at least 5.5
mph.
REEL COMING LOOSE IN FIELD Reel bearing lock collars mounted on
wrong side of reel Mount lock collars on side of reel toward
center of machine.
Lock collars tightened in wrong
direction. Lock in direction of reel
rotation.
REEL NOT MOVING SOIL
ADEQUATELY Reel mounted backwards Mount again per assembly instructions
(See “Reel Assembly” on
page 3-31.)
.
Running machine too slow Machine needs to be pulled at least 5.5
mph.
Machine not level Adjust radius rod to level machine.
PROBLEM PROBABLE CAUSE SOLUTION