Landoll EHP, Operator'S Manual

Page: 20 / 54

2-12 F-1153-2308
COMPONENT OVERVIEW
TABLE OF CONTENTS
is a 1.66 cubic inch displacement, 2700 psi internal relief
pump pushing the hydraulic power needed to operate the
equipment’s hydraulic components.
Hydraulic Reservoir
The hydraulic reservoir is mounted on the curbside of the
enclosure. It is a baffled 30-gallon reservoir with a
breathable fill cap and strainer. To check the fluid level,
remove filler cap and observe the strainer screen. Use the
bottom of the strainer screen as a sight gauge, do not fill
reservoir higher than the bottom of the screen. This will
allow room in the reservoir for fluid expansion. The
reservoir also provides the mounting surface for the return
filter,
See Figure . To access the hydraulic filter, remove
the top cover of the enclosure. To access the drain plug,
remove the rear cover of the enclosure,
See Figure 2-1
on Page 2-2.
Figure 2-14: Hydraulic Reservoir Specifications
Figure 2-15: Hydraulic Reservoir
HYDRAULIC RESERVOIR SPECIFICATIONS
CAPACITY 30 GAL (113L)
Oil, Hydraulic
(30 GAL) (113 L)
ISO Grade 32
Fill to bottom of strainer screen.
Fluid change
12 Months or every 500 Hours
Hydraulic Filter
Element
Filter Part#: 1-295-010002
Filter replacement
12 Months or every 500 Hours
Strainer
Replace when defective
Gasket, Hyd Tank Filler
Part#: 223220 (order 2 each)
Filler Breather Strainer Assembly
Part#: 3-162-010001
RESERVOIR
RETURN FILTER
FILL CAP & STRAINER
(BREATHER)
RESERVOIR REMOVED FOR CLARITY
DRAIN
PLUG