F-459-R1
1-1
Chapter 1
Intro, Safety, Inspection and Dash Operations
Introduction
This manual is intended for the service technician who is
seeking information on product maintenance and service
replacement parts. It contains troubleshooting tips and
information on repair which will help the technician solve
problems that may occur.
Operating Instructions
This manual does not contain operating instructions.
Operating instructions are sent with each truck. If the
operators manual is missing on your SLT30/35 AC truck,
call Landoll Corporation to order a replacement.
Service Training
Service Training is available for the forklift technician from
Landoll Corporation. This includes operation, repair,
maintenance, hydraulic system, electrical system and
wire guidance. Contact your regional Landoll service
representative for more information.
Tools Needed
The tools needed will be the same tools that are often
found in well-equipped service centers, in both SAE and
metric sizes. For example, an assortment of open-end
and box-end wrenches, sockets, as well as Allen and
adjustable wrenches, assorted screwdrivers and
non-marring mallets should be available.
Replacement Parts
When ordering parts that will be used for the repair and
maintenance of your Landoll SLT30/35 AC truck, the
model and serial number of the truck being repaired will
be required. This information is located on the serial
number and capacity plate located on the right operators
console. See Figure 1-1.
Figure 1-1: Serial Number and Capacity Plate
https://www.forkliftpdfmanuals.com/
