Landoll Brillion WL360, Operator'S Manual

Page: 54 / 84

2-38 9J577-0822
TABLE OF CONTENTS
Rear Scraper Assembly
For Notched Ductile Wheels Only.
Scraper brackets are mounted on the inside of the end
brackets and center bracket and attach with 1/2-13 x
1-3/4 Bolts, Flat Washers, Lock Washers, and Nuts. The
scraper tubes are to be centered with respect to the
rollers.
1. With the Scraper Tube between 2 inch wide Scraper
and Bracket, mount Scraper to the Bracket with
3/8-16 x 3-1/2 Bolts, Flat Washers, Lock Washers,
and Nuts. These scrapers are fixed and cannot be
moved side to side. Take the other 2" wide scraper
and mount it on the tube by the right hand roller end
wheel and the center bearing bracket using 3/8-16
U-Bolts, Flat Washers, Lock Washers, and Nuts.
See
Figure 2-36.
2. Attach the 2-1/2 inch Scrapers to the tube using
3/8-16 U-Bolts, Flat Washers, Lock Washers, and
Nuts.
3. Gap between the wheel and the scraper should be 1/4
inch. See Figure 3-5.
Figure 2-36: Center Rear Scrapers
Right Hand
Scraper Bracket
Scraper Tube
Nut,3/8-16
Lock
Washer,3/8
Flat Washer,3/8
U-Bolt,3/8-16
Bolt,3/8-16 x 3-1/2
Bolt,
1/2-13 x 1-3/4
2" Scraper
Flat
Washer,1/2
Scraper
Bracket
Left Hand
Scraper
Bracket
Lock Washer,1/2
Nut,
1/2-13
2" Scraper
2" Scraper
2-1/2" Scraper