Landoll Brillion LSP5, Operator'S Manual

Page: 18 / 34

3-2 7K458-0221
TABLE OF CONTENTS
Attaching to a Tractor
When hooking up seeders:
• Attach tractor.
• Remove Klik Pin, pull parking pin into outer position,
• Replace Klik Pin.
When unhooking seeder:
• Remove Klik Pin, push in parking pin,
• Replace Klik Pin.
• Disconnect tractor.
On LSS6, skid steer models, there is a parking pin located
on each side of the frame. In addition, a quick attach
frame attaches to the rear frame tube of the seeder by
means of two pins and Klik Pins.
See Figure 3-2.
Figure 3-2: Attaching to a Tractor
Parking
Pin
Klik Pin
Use this hole when
Use this hole when
Connected to tractor
Parking Pin
(each side)
Quick
Attach
Frame
Pin,
(2) Klik Pins
Disconnected from the tractor