Landoll Brillion CPPR2-5, Operator And Parts Manual

Page: 7 / 48

9D990-2401 1-1
INDEX TABLE OF CONTENTS
Chapter 1
Safety Information
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly,
maintenance and safe operation will allow this machine to
provide you with satisfactory use for seasons to come.
DANGER
Description of Unit
The Chisel Plow was the machine that started the age of
“conservation tillage” as we know it today. The 2-Bar
Chisel Plow offers an effective and economic solution to
basic primary tillage. A wide variety of shank
configurations and points allow the producer to fine tune
the Chisel Plow to fit his requirements.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
• The information in this manual is current at the time of
printing. Some parts may change to assure peak
performance.
• Location reference: Right and Left designations in this
manual are determined by facing the direction the
implement will travel during field operation, unless
otherwise stated.
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts, and
service equipment specially designed for Brillion
products. Your implement’s parts should only be replaced
with Brillion parts. If items covered in this manual are not
understood, contact your local Brillion dealer.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered,
within 10 days of retail purchase, using the Landoll
Company, LLC Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
www.landoll.com for step by step
instructions regarding product registration.
Enter your product information below for quick reference.
Refer to the ID plate as shown.
See Figure 1-1.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
a
Figure 1-1: ID Plate
Read this entire manual before attempting to
assemble, adjust or operate this machine. Failure
to comply with this warning can result in personal
injury or death, damage to the machine or its
components and inferior operation.