Landoll Brillion CPPR2-5, Operator And Parts Manual

Page: 39 / 48

ILLUSTRATED PARTS LIST
9D990-2401 6-11
TABLE OF CONTENTS INDEX
Decals
Figure 6-10: Decals
Decals
ITEM PART NUMBER DESCRIPTION QTY
1 4K036 DECAL-BRILLION (2 3/4 X 20) 1
2 8J310 DECAL - CAUTION 1
3 1-573-010006 PLACARD, NAME 1
4 107-0814 RIVET 1/8X1/8 A LUM POP (HARDWARE FOR ITEM 3) 2
5 2P151 SMV W/BRACKET 1
6 2-573-010198 DECAL, MEMBER FEMA 1
ITEM 1 - 4K036
ITEM 2 - 8J310
CAUTION
1. DO NOT LUBRICATE, ADJUST OR REPAIR WHEN MACHINE IS IN MOTION.
2. DO NOT TOW OR TRANSPORT FASTER THAN 15 MILES PER HOUR.
3. DO NOT RIDE OR ALLOW OTHERS TO RIDE ON THE MACHINE.
4. BLOCK UP ALL HYDRAULICALLY OR MECHANICALLY RAISED COMPONENTS TO PREVENT
UNINTENDED LOWERING OR LOWER THE MACHINE TO THE GROUND TO MAKE ADJUSTMENT
OR REPAIRS OR WHEN NOT IN USE.
5. KEEP ALL PERSONS AWAY FROM MACHINE DURING HITCHING AND OPERATING.
6. SLOW DOWN BEFORE MAKING SHARP TURNS OR USING THE BRAKE.
DRIVE SLOWLY OVER ROUGH GROUND, SIDE HILLS, AND AROUND CURVES TO AVOID TIPPING.
7. COMPLY WITH ALL LAWS WHEN TRANSPORTING THE MACHINE ON PUBLIC ROADWAYS.
8. INSTRUCT ALL OPERATORS IN THE SAFE OPERATION OF THE MACHINE.
REVIEW THE OPERATOR’S MANUAL FOR CORRECT PROCEDURES.
9. BLOCK IMPLEMENT TO PREVENT MOVEMENT WHEN UNHITCHED FROM TRACTOR.
10. KEEP ALL GUARDS AND SHIELDS IN PLACE WHILE MACHINE OR PARTS ARE IN MOTION.
8J310
MODEL #
SERIAL #
MADE IN USA 1-573-010006
Landoll Company, LLC
Marysville, Kansas
www.landoll.com
ITEM 3
1-573-010006 - “PLACARD”
ITEM 5
2P151
ITEM 6
2-573-010198
FARM EQUIPMENT
MANUFACTURERS
A S S O C I A T I O N
MEMBER