Landoll Bendi B40i4, Maintenance Manual

Page: 99 / 142

TROUBLESHOOTING AND CORRECTIVE MAINTENANCE
3-51
Overhead Guard/Lighting/Alarms
Trucks equipped with optional flood / headlights, tail and
stop lights, flashing or spot lights (strobe lights), etc.
contain non-replaceable bulbs. The truck is equipped
with LED bulbs and replacement varies according to
manufacturer, but usually the unit gets replaced as a one
assembly. See Figure 3-72.
Additional options can include backup alarms.
Figure 3-72: Overhead Guard Assembly
Back Up Alarms
Two types of back up alarm are offered - audible and
voice.
1. First, review “ Before You Begin,” page 1-1.
2. Set the key switch to “OFF” and remove key from the
ignition switch.
3. Apply the parking brake and disconnect the battery.
4. To replace the alarm assembly disconnect the wire
connector and remove the mounting hardware
holding the alarm to its mounting bracket.