CALIBRATION AND PROGRAMMING
4-11
10.
0,3-RPM_RampUp
- Pre defined in software, for
reference only
11.
0,3-RPM_RampDown
- Pre defined in software, for
reference only.
Figure 4-14: Pump Scaler Screen
Pump Scaler Screen
The “PUMP SCALER” screen shot provides featured
parameters for the Plus 1 functions. See Figure 4-14.
Below is provided a definitions list for forklift
parameters: See Figure 4-14.
1.
0,3-RPM_Per_RampUp
– Sets period for lift
command to execute.
2.
0,3-RPM_Per_RampDown
– Sets period for lift
command to execute.
3.
0,3-RPM_PER_X1
– Pre defined in software, for
reference only.
4.
0,3-RPM_PER_X2
– Pre defined in software, for
reference only.
5.
0,3-RPM_PER_X3
– Pre defined in software, for
reference only.
6.
0,3-RPM_PER_X4
– Pre defined in software, for
reference only.
7.
0,3-RPM_PER_X5
– Pre defined in software, for
reference only.
8.
0,3-RPM_PER_X6
– Pre defined in software, for
reference only.
9.
0,3-RPM_PER_Y1
– Value sets the added percent of
change required for lift while in motion.
10.
0,3-RPM_PER_Y2
– Value sets the added percent of
change required for lift while in motion.
11.
0,3-RPM_PER_Y3
– Value sets the added percent of
change required for lift while in motion.
12.
0,3-RPM_PER_Y4
– Pre defined in software, for
reference only.
13.
0,3-RPM_PER_Y5
– Pre defined in software, for
reference only.
14.
0,3-RPM_PER_Y6
– Pre defined in software, for
reference only.
Summary of Contents for Bendi B40i4
