Landoll Bendi B40i4, Maintenance Manual

Page: 106 / 142

4-6 F-581-R1
CALIBRATION AND PROGRAMMING
Figure 4-8: Input Screen
Input Screen
“INPUTS SCREEN” showing added functions monitored.
Below is provided a definitions list for forklift
parameters: See Figure 4-8.
1. 0,3-CP_BRAKE_SW – On when stop pedal is
depressed, Off when stop pedal is in neutral position.
Signal provided from a pressure transducer,
2. 0,3-CP_FORWARD_SW - Displays the state of the
direction Switch, On when forward is selected, Off
when forward is not selected.
3. 0,3-CP_REVERSE_SW - Displays the state of the
direction Switch, On when reverse is selected, Off
when reverse is not selected.
4. 0,3-CP_Seat_SW - On when operator is present, Off
when operator is not present.
5. 0,3-CP_Tilt_SW – Displays status of tilt command,
On when tilt lever is manipulated in either direction,
Off when lever is in the neutral position.
6. 0,3-CP_SideShift_SW – Displays status of Shift
command, On when Shift lever is manipulated in
either direction, Off when lever is in the neutral
position.
7. 0,3-CP_TransFilter_SW - If trans filter is
plugged/clogged TrnasFilter_switch icon will be
true/on.
8. 0,3-CP_Steer_Pot - Represents steer angle scaled
from -100% to +100% with straight being 0%.
9. 0,3-CP_Pedal_Pot - Represents pedal position in
.01%, 10000 being 100%.
10. 3-CP_Lift_Spool_pot – Represents lift position
scaled from -100% to +100% with neutral being 0%.