Landoll 7822 Series, Operator'S Manual

Page: 18 / 34

4-2 F-1045-0819
OPERATION & MAINTENANCE
TABLE OF CONTENTS
• The front row fractures soil to the left side of each of
the front blades, while the rear row fractures soil to
the right side of each of the rear blades.
• As a result, each blade, in each row is moving soil in
the same direction as the others in that row. Because
of this, the HSL creates and maintains a level field.
The primary depth control of the HSL is directly in front of
the machine. The main wheels and tires on the hitch, and
the wing gauge wheels and tires on the wing frames
provide primary depth gauge.
The HSL is equipped with a reel/roller system that
stabilizes the machine, reconstitutes the worked soil and
provides a finished characteristic to the reel/roll
purchased.
The depth of the depth gauges is controlled from a single
point control just to the left of the tilt cylinder on the hitch.
The depth control utilizes a master and slave hydraulic
cylinder system.
The down pressure of the reel/roller system is controlled
from a single point control on the left had wing. The
setting of the reel/roller system utilizes a master and
slave hydraulic cylinder system.
The rear depth reel/roller system the HSL is not intended
to be a depth control. It is intended to stabilize the 7822
and re-consolidate the worked soil. The rear reel/roller
system is available in five different offerings as shown in
the figure below
.
W
Figure 4-1: Rear Gauge Reels & Rollers
21” Ceveron Reel
16” Double Chevron Reel
(Not available on 23’ model)
23.5” Four Leaf Spring Reel
23.5” Fixed Hemisphere
Spring Reel
21” Corrugated Rubber Roller