Landoll 4620-24, Operator'S Manual

Page: 9 / 64

F-886-0322 1-1
TABLE OF CONTENTS
Chapter 1
Safety Information
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly and
maintenance will provide you with satisfactory use for
seasons to come.
DANGER
DANGER
Description of Unit
The 4620-24 Folding Seeder folds forward for narrow
transport width under 14 feet and seeds 24 feet per pass.
Each seeder section features a 15-bushel capacity Seed
Box with proven Micro-Meter Seed Metering System. The
Seeder Wings float 5 degrees left to right and 5 degrees
front to rear on torsion springs to follow the ground’s
contours. The Seeder Sections are ground driven and are
equipped with an electric clutch. The tractor mounted
controller allows the operator to control clutch
engagement, view planted acreage, and monitor seed
shaft rotation along with minimum seed box levels.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment, and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
•
The information in this manual is current at time of
printing. Some parts may have changed to assure
top performance.
• Location reference: Right and Left designations in
this manual are determined by facing the direction
the implement will travel during field operation,
unless otherwise stated.
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts and
service equipment specially designed for Brillion
products. Your implement’s parts should only be
replaced with Brillion parts. If items covered in this
manual are not understood, contact your local Brillion
Dealer.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered
within 10 days of retail purchase, using the Landoll
Company, LLC Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
www.landoll.com for step by step
instructions regarding product registration.
Enter your product information below for quick reference.
_____________________________________________
MODEL NUMBER
_____________________________________________
SERIAL NUMBER
_____________________________________________
DATE OF PURCHASE
Refer to the ID plate shown below. See Figure 1-1.
Figure 1-1: ID Plate
Read this entire manual before attempting to
assemble, adjust or operate this implement.
Failure to comply with this warning can result in
personal injury or death, damage
to the
implement or its components and inferior
operation.
MODEL #
SERIAL #
MADE IN USA 1-573-010006
Landoll Company, LLC
Marysville, Kansas
www.landoll.com